FABBACK Colored Acrylic Mirror
FABBACK color acrylic mirror sheet is made from OPTIX® continuously processed acrylic sheet. Using vacuum metalizing, each sheet is given a mirror finish that is protected by the industry’s toughest, most durable backing. An overage of 1” is provided on standard sheet sizes for maximum yield when laser cutting, and all mirror acrylic colored sheet is covered by a 3-mil laser cuttable film. 19 stocked colors with custom colors and sizes available.
Stock & Non-Stock Colors
*Colors on screen may not reflect exact matches to physical sheets.
*Custom colors available.
*Non-Stock colors, patterns or sizes may require a minimum quantity order.
- Thickness: .060" - .236"
- Width: 5" - 80"
- Length: 10" - 120"
- Features the industry's toughest protective back coating
- All mirrored acrylic sheet is supplied with a 1" overage on length and width
- Custom sizes, colors and thicknesses available
- 2404 Bronze and 2064 Gray available in .236" thickness
- AR scratch-resistant coating available
|Specific Gravity/Relative Density||ASTM D-792||1.19|
|Water Absorption||ASTM D-570||% By wt||0.4|
|Tensile Strength||ASTM D-638||psi||**11,030|
|Tensile Modulus of Elasticity||--||psi||**490,000|
|Flexural Strength||ASTM D-790||psi||**17,000|
|Izod Impact Strength – Molded Notch||ASTM D-256||ft-lb/in Notch||**0.4|
|Rockwell Hardness||ASTM D-785||**M-95|
|Maximum Recommended Continuous Service Temperature||°F||160|
|Deflection Temperature @ 264 psi (1.8 MPa)||ASTM D-648||°F||203|
|Deflection Temperature @ 66 psi (0.45 MPa)||ASTM D-648||°F||207|
|Coefficient of Thermal Expansion||ASTM D-696||in/(in-°F ) x 10-5||3.0|
|Flammability (Burning Rate)||ASTM D-635||In/minute||1.019|
|Smoke Density Rating||ASTM D-2843||%||3.4|
|Self-Ignition Temperature||ASTM D-1929||°F||833|
**Applicable to the acrylic substrate
These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale.