FABBACK Textured Acrylic Mirror
For both excellent durability and special design needs, FABBACK Textured Acrylic Mirror is an ideal choice. Available in prismatic and Non-Glare patterns, FABBACK provides the industry’s toughest protective back coating, which protects against scratching during fabrication. FABBACK Textured Acrylic Mirror is available in a 48" x 96" sheet size and .125" thickness.
- Thickness: .125" - .125"
- Width: 5" - 48"
- Length: 10" - 96"
|Item #||Finishes||Thickness (in.)||Size (in.)||Sq. Ft.||Pack Qty.||Skid Qty.||Masking|
|C100607M||PL-21 Prismatic||.125||48" x 96"||32||N/A||80||No Masking|
|C100683M||Non-Glare||.125||48" x 96"||32||N/A||80||No Masking|
- Decorative mirror patterns
|Specific Gravity/Relative Density||ASTM D-792||1.19|
|Water Absorption||ASTM D-570||% By wt||0.4|
|Tensile Strength||ASTM D-638||psi||**11,030|
|Tensile Modulus of Elasticity||--||psi||**490,000|
|Flexural Strength||ASTM D-790||psi||**17,000|
|Izod Impact Strength – Molded Notch||ASTM D-256||ft-lb/in Notch||**0.4|
|Rockwell Hardness||ASTM D-785||**M-95|
|Maximum Recommended Continuous Service Temperature||°F||160|
|Deflection Temperature @ 264 psi (1.8 MPa)||ASTM D-648||°F||203|
|Deflection Temperature @ 66 psi (0.45 MPa)||ASTM D-648||°F||207|
|Coefficient of Thermal Expansion||ASTM D-696||in/(in-°F ) x 10-5||3.0|
|Flammability (Burning Rate)||ASTM D-635||In/minute||1.019|
|Smoke Density Rating||ASTM D-2843||%||3.4|
|Self-Ignition Temperature||ASTM D-1929||°F||833|
**Applicable to the acrylic substrate
These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale.