VIVAK offers a unique balance of physical properties and ease of fabrication. It is ideally suited for complex parts requiring fabrication, including deep thermoforming draws and precise molded-in details. VIVAK PETG is produced using resin that complies with FDA requirements for food contact applications.
Stock & Non-Stock Colors
*Colors on screen may not reflect exact matches to physical sheets.
*Custom colors available.
*Non-Stock colors, patterns or sizes may require a minimum quantity order.
Stock & Non-Stock Patterns
- Thickness: .020" - .500"
- Width: 24" - 48"
- Length: 14" - 216"
- Features: Weatherable
- Easily decorated by painting, silk screening or hot stamping
- Custom sizes and thicknesses available
- Available in clear, colors and WITH Satin finish
|Physical||Test method||Units||VIVAK PETG|
|Specific Gravity/Relative Density||ASTM D-792||1.27|
|Optical Refractive Index||ASTM D-542||1.57|
|Light Transmission -Total||ASTM D-1003||%||86|
|Light Transmission - Haze||ASTM D-1003||%||1.0|
|Water Absorption||ASTM D-570||% By wt||0.2|
|Mechanical||Test method||Units||VIVAK PETG|
|Tensile Strength||ASTM D-638||psi||7,700|
|Tensile Modulus of Elasticity||--||psi||320,000|
|Flexural Strength||ASTM D-790||psi||11,200|
|Flexural Modulus of Elasticity||ASTM D-790||psi||310,000|
|Dielectric Constant @1kHz||ASTM D-150||2.6|
|Dielectric Contstant @1mHz||ASTM D-150||2.4|
|Dielectric Strength||ASTM D-149||volts/mil||410|
|Compressive Strength||ASTM D-695||psi||8,000|
|Shear Strength||ASTM D-732||psi||9,000|
|Izod Impact Strength – Molded Notch||ASTM D-256||ft-lb/in Notch||1.7|
|Izod Impact Strength – Milled Notch||ASTM D-256||ft-lb/in Notch||1.2|
|Drop Dart Impact||ASTM D-3763||ft-lbs||22|
|Rockwell Hardness||ASTM D-785||R-115|
|Thermal||Test method||Units||VIVAK PETG|
|Deflection Temperature @ 264 psi (1.8 MPa)||ASTM D-648||°F||157|
|Deflection Temperature @ 66 psi (0.45 MPa)||ASTM D-648||°F||164|
|Coefficient of Thermal Expansion||ASTM D-696||in/(in-°F ) x 10-5||3.8|
|Thermal Conductivity||ASTM E-1225||BTU-ft/(hr-ft2-°F)||0.13|
|Flammability (Burning Rate)||ASTM D-635||In/minute||0.06|
|Smoke Density Rating||ASTM D-2843||%||53.8|
|Self-Ignition Temperature||ASTM D-1929||°F||880|
|Flame Spread Index||ASTM E-84||85|
|Smoke Developed Index||ASTM E-84||450|
|Glasss Transition Temperature||ASTM D-3418||°F||178|
These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale.