- Products & Services
Products & Services
Core Offerings
Materials
Product Brands
- Industry
- Catalog
- Where to Buy
-
FABBACK® Textured Acrylic Mirror
For both excellent durability and special design needs, FABBACK Textured Acrylic Mirror is an ideal choice. Available in prismatic and Non-Glare patterns, FABBACK provides the industry’s toughest protective back coating, which protects against scratching during fabrication. FABBACK Textured Acrylic Mirror is available in .125" thickness, 48" x 96" sheet size.
Custom colors available.
**Colors on screen may not reflect exact matches to physical sheets.
*Non-Stock colors, patterns or sizes may require a minimum quantity order.
Decorative mirror patterns
Shatter-resistant
| REQUEST | ITEM # | COLORS | PATTERN/TEXTURES | MASKING | THICKNESS (in.) | SIZE (in.) | SQ FT | PACK QTY | SKID QTY |
|---|---|---|---|---|---|---|---|---|---|
 |
C100607M | Clear | Prismatic | No Masking | .125 | 48” x 96” | 32 | 80 | |
|
C100683M | Clear | Non-Glare | No Masking | .125 | 48” x 96” | 32 | 80 |
Physical |
TEST METHOD |
UNITS |
FABBACK |
|---|---|---|---|
Specific Gravity/Relative Density |
ASTM D792 |
1.19 |
|
Water Absorption |
ASTM D570 |
% |
0.4 |
Mechanical |
TEST METHOD |
UNITS |
FABBACK |
|---|---|---|---|
Tensile Strength |
ASTM D638 |
psi |
**11,030 |
Tensile Modulus of Elasticity |
ASTM D638 |
psi |
**490,000 |
Flexural Strength |
ASTM D790 |
psi |
**17,000 |
Izod Impact Strength – Molded Notch |
ASTM D256 |
ft-lb/in Notch |
**0.4 |
Rockwell Hardness |
ASTM D785 |
**M-95 |
Thermal |
TEST METHOD |
UNITS |
FABBACK |
|---|---|---|---|
Maximum Recommended Continuous Service Temperature |
°F |
160 |
|
Softening Temperature |
°F |
210-220 |
|
Melting Temperature |
°F |
300-315 |
|
Deflection Temperature @ 264 psi (1.8 MPa) |
ASTM D648 |
°F |
203 |
Deflection Temperature @ 66 psi (0.45 MPa) |
ASTM D648 |
°F |
207 |
Coefficient of Thermal Expansion |
ASTM D696 |
in/in/°F |
3.0x10-5 |
Flammability (Burning Rate) |
ASTM D635 |
in/minute |
1.019 |
Smoke Density Rating |
ASTM D2843 |
% |
3.4 |
Self-Ignition Temperature |
ASTM D1929 |
°F |
833 |
**Applicable to the acrylic substrate
These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale.