OPTIX® Thin Gauge Acrylic
Crystal clear and incredibly strong, OPTIX Thin Gauge acrylic sheet is engineered specifically for use in today’s electronic applications. Each sheet of Plaskolite OPTIX Thin Gauge is supplied with a low-residue film masking for optical applications
Run-to-Size Capabilities
Available Colors
Custom colors available.
**Colors on screen may not reflect exact matches to physical sheets.
*Non-Stock colors, patterns or sizes may require a minimum quantity order.
Features & Benefits
Impact modified available with abrasion resistant coating
Widths available up to to 58"
Thickness range from .031" - .039"
Physical |
TEST METHOD |
UNITS |
OPTIX |
|---|---|---|---|
Specific Gravity/Relative Density |
ASTM D792 |
1.19 |
|
Optical Refractive Index |
ASTM D542 |
1.49 |
|
Light Transmission -Total |
ASTM D1003 |
% |
92 |
Light Transmission - Haze |
ASTM D1003 |
% |
2 |
Sound Transmission |
ASTM E90 / E413 |
dB |
27 |
Water Absorption |
ASTM D570 |
% |
0.4 |
Mold Shrinkage |
ASTM D955 |
mils/in |
2-6 |
Mechanical |
TEST METHOD |
UNITS |
OPTIX |
|---|---|---|---|
Tensile Strength |
ASTM D638 |
psi |
11,030 |
Tensile Elongation – Max. |
ASTM D638 |
% |
5.8 |
Tensile Modulus of Elasticity |
ASTM D638 |
psi |
490,000 |
Flexural Strength |
ASTM D790 |
psi |
17,000 |
Flexural Modulus of Elasticity |
ASTM D790 |
psi |
490,000 |
Izod Impact Strength – Molded Notch |
ASTM D256 |
ft-lb/in Notch |
0.4 |
Izod Impact Strength – Milled Notch |
ASTM D256 |
ft-lb/in Notch |
0.28 |
Tensile Impact Strength |
ASTM D1822 |
ft-lb/in2 |
20 |
Abrasion Resistance - Change in Haze - 0 cycles |
ASTM D1044 |
Haze, % |
0 |
Abrasion Resistance - Change in Haze - 10 cycles |
ASTM D1044 |
Haze, % |
11.2 |
Abrasion Resistance - Change in Haze - 50 cycles |
ASTM D1044 |
Haze, % |
24 |
Abrasion Resistance - Change in Haze - 200 cycles |
ASTM D1044 |
Haze, % |
24.9 |
Rockwell Hardness |
ASTM D785 |
M-95 |
Thermal |
TEST METHOD |
UNITS |
OPTIX |
|---|---|---|---|
Maximum Recommended Continuous Service Temperature |
°F |
170-190 |
|
Softening Temperature |
°F |
210-220 |
|
Melting Temperature |
°F |
300-315 |
|
Deflection Temperature @ 264 psi (1.8 MPa) |
ASTM D648 |
°F |
203 |
Deflection Temperature @ 66 psi (0.45 MPa) |
ASTM D648 |
°F |
207 |
Coefficient of Thermal Expansion |
ASTM D696 |
in/in/°F |
3.0x10-5 |
Thermal Conductivity |
ASTM C177 |
BTU-ft/ft2/hr/°F |
0.075 |
Flammability (Burning Rate) |
ASTM D635 |
in/minute |
1.019 |
Flammability |
UL 94 |
HB |
|
Smoke Density Rating |
ASTM D2843 |
% |
3.4 |
Self-Ignition Temperature |
ASTM D1929 |
°F |
833 |
Flame Spread Index |
ASTM E84 |
115 |
|
Smoke Developed Index |
ASTM E84 |
550 |
**Applicable to the acrylic substrate
These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control. We recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale.